What Remote Monitoring Covers
See Your Critical Environment From Anywhere
Critical infrastructure rarely fails without warning. A battery weakens, a cooling unit struggles, water creeps under a floor, load grows past what the room was built for. The signs are there long before the outage, if someone is watching.
UPS Solutions designs, supplies, installs and supports remote monitoring for data centres, server rooms and critical sites across Australia. It covers three layers: the facility with DCIM & CREMS, the room with environmental monitoring and security, and the UPS with our 24/7 UPS Remote Monitoring Service.
Start with one layer or bring all three together. We are vendor agnostic, so the solution is chosen for your site and works with the equipment you already run.
Not sure where to start?
- Facility, room and UPS monitoring
- Works with your existing equipment
- Design, installation and training
- Supported across Australia
Three Layers, One Complete Picture
Each of our monitoring solutions watches a different layer of your critical environment: the facility, the room and the UPS. Choose one, or bring all three together so nothing goes unseen.
Tap a layer to explore
Power, cooling, space and assets across the whole facility, plus one platform for every sensor and alarm in the room. Capacity is planned rather than discovered.
- Power
- Cooling
- Capacity
- Assets
Our Remote Monitoring Solutions
Three solutions, one for each layer of your critical environment. Each has its own page with the full detail.
Swipe to see all three
Facility layerDCIM & CREMS
One live view of power, cooling, capacity and assets, plus a single platform for every sensor in the room.
- Vertiv Trellis and EcoStruxure
- Capacity and energy planning
- Design, implementation and training
Room layerEnvironmental Monitoring & Security
Sensors for temperature, humidity, leaks, smoke, heat and battery health, with cameras and access control.
- Five sensor ranges
- Cameras and door sensing
- APC NetBotz, Vertiv, ServersCheck
UPS layerUPS Remote Monitoring
Every UPS watched 24/7 by our technicians, with alerts, remote diagnostics and callouts included.
- Battery, load and alarms
- Customer or private network
- One UPS to a national fleet
Which Solution Do I Need?
Pick the Statement That Sounds Most Like You
Choose the statement that sounds most like you
We will point you to the solution that fits. You can always talk to us if you are not sure.
Why Choose UPS Solutions for Remote Monitoring
Australian owned critical infrastructure specialists since 2002. One team designs, installs, monitors and services your power, cooling and the room around them.
Problems found early
Weak batteries, rising heat, water and overloads are flagged while there is still time to act, not discovered in an outage.
Watched around the clock
UPS fleets are monitored 24/7 by our technicians, and every layer raises alerts the moment a limit is crossed.
Works with what you run
Vendor agnostic and built around your existing UPS, racks, cooling and network, without replacing infrastructure.
Decisions backed by data
Capacity, energy and replacement spend planned from real readings instead of guesswork.
One team, Australia wide
The people who design and install your monitoring also service the power and cooling it watches.
A record you can rely on
Continuous logs and reports support audits, insurance, compliance and maintenance planning.
Vertiv, Schneider Electric, APC, ServersCheck and every major UPS brand, chosen to suit the site. The solution comes first. The brand comes second.
Related Solutions
Swipe for more
Tell us what you need to see
Your sites, the equipment you run and what keeps you up at night. That is enough for us to recommend the right layers of monitoring and how to roll them out.
Remote Monitoring FAQs
The questions we are asked most when scoping monitoring for a site or a fleet.
What is remote monitoring for critical infrastructure?
Remote monitoring watches the equipment and conditions that keep your critical systems running, from anywhere. At UPS Solutions it covers three layers: the facility with DCIM and CREMS, the room with environmental monitoring and security, and the UPS with our 24/7 UPS Remote Monitoring Service. Problems are flagged while there is still time to act.
What is the difference between DCIM, environmental monitoring and UPS remote monitoring?
DCIM gives one view of power, cooling, capacity and assets across a facility, and CREMS brings every sensor in the room onto one platform. Environmental monitoring and security is the hardware in the room: temperature, humidity, leak, smoke and battery sensors, cameras and access control. UPS remote monitoring is our service that watches your UPS fleet 24/7, with alerts, remote diagnostics and callouts.
Which one do I need?
If your main concern is whether your UPS will hold up, start with UPS Remote Monitoring. If you need to know when a room gets too hot, wet or is accessed, start with environmental monitoring and security. If you need to plan capacity and see power and cooling across a facility, start with DCIM and CREMS. Many critical sites use all three together.
Can monitoring be added to our existing equipment?
Yes. Sensors, monitoring appliances, network management cards and software are added to the UPS, racks, cooling and network you already run, without replacing your infrastructure. We are vendor agnostic and support all major UPS brands.
Do you monitor sites across Australia?
Yes. UPS fleets are monitored 24/7 from our Sydney monitoring centre, backed by field technicians across the mainland capitals, with service coverage extending to Darwin, the Sunshine Coast, the Gold Coast and Hobart.
Which brands and platforms do you work with?
We supply and support Vertiv Trellis, Schneider Electric EcoStruxure, APC NetBotz, Vertiv environmental monitoring including Liebert RDU-A G2 and Geist, ServersCheck, PowerShield battery monitoring and smart UPS systems from all major vendors.